How to Refill an Inkjet Cartridge

Refilling an inkjet cartridge is not as difficult as it appears provided you supervene a few simple steps. It is important first to remember that you must never overfill your printer inkjet cartridge, and/or if you think a cartridge is leaking, you should never put it into your printer.

First of all you will need to buy an ink refill kit. This can be done online for fairly cheap or if you need it immediately, you can get one at your local office contribute store. The ink refill kit is normally not that high-priced to buy, and considering the price of ink cartridges you will no doubt allembracing save money. To add to the list, you will also need a roll of paper towels or newspaper. It is also best to use a flat surface when you are refilling your printer inkjet cartridge.

Printer Inkjet

Once you have all things prepared, take the empty ink cartridge out of your printer. It is probably best at this point to wear some disposable gloves as sometimes the ink can be messy, and not always easy to take off from your hands. Most habitancy who do this for the first time without gloves normally end up with some on their hands.

At this point get a consolidate of paper towels or newspaper, so that you have a thickness to catch any ink that may leak, and place the empty cartridge on the it. It is always good to read the instructions that came with the ink refill kit before starting. There may be some exact differences for separate types of inkjet cartridges.

Once you are satisfied, take the next step and find the holes on top of the cartridge, normally these are truly found if you rub your fingers over the label. Try to find something sharp like the tip of a pencil or even a ballpoint pen and pierce the refill holes of the inkjet cartridge. Remember, when filling your cartridge that also black there are also three other colors; yellow, cyan and magenta. It is at this stage that you must take great care to put the proper color in the precise hole; you could always use a toothpick to insert into the holes to recognize colors if you are not sure. It is no fun if you put the wrong color in the wrong hole; you would end up printing some very strange family photos.

If you are sure you have found the precise hole you can now insert the needle of the refill ink into the hole. Add the ink slowly development sure you don't over fill. If you see any ink oozing out don't let go of the bottle but slowly release the air which will suck a microscopic ink back out of the cartridge before removing completely. You should not have to seal the refill holes due to the breather holes that are already on the top of the inkjet cartridge. Check to make sure no ink is leaking from the hole as you do not one ink color running into other color.

Once you are done, you can put unused ink back in their proper bottle. It is important to make sure you clean out the syringes with water. Most habitancy like to label their syringes with the color that was used. Replace your inkjet cartridge back into the printer and run the print head cleaning cycle a consolidate of times and you should be ready for printing!

How to Refill an Inkjet Cartridge